The Banana Pi BPI-M7 single board computer is equipped with up to 32GB RAM and 128GB eMMC flash, and features an M.2 2280 socket for one NVMe SSD, three display interfaces (HDMI, USB-C, MIPI DSI), two camera connectors, dual 2.5GbE, WiFi 6 and Bluetooth 5.2, a few USB ports, and a 40-pin GPIO header for expansion.
Do you really think that will make a difference. For what’s worth how much do you pay to have a 35W device running all year? In my case I’m paying a crazy 0,157€/kW… Amounts to 35/1000*24*365*0.157 = 48.14€/year considering a full load that the machine never has.
The max Power consumption often does not matter on devices that run 24/7 more important is the idle powet consumption. Here are SBCs and ARM Chips in generell way better.
I had my Pi 3B+ down to under 5W on idle having various services running. I can not speek for newer Pi versions but i would estimate them still lower then 8W on idle. That is really hard to beat with an normal PC. Maybe the Mini PC with newer Mobile or integrated CPUs are getting in this region.
Not quite sure where you got the 37W for the HP Mini.
Check this out: https://lemmy.world/comment/5503906
Lmao did you just compare the highest possible power consumption on a Pi with the lowest possible consumption on a desktop PC?
Lmao, do your research before commenting stuff like that.
Here’s how things look on the HP model above:
Model name: Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz BIOS Model name: Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz To Be Filled By O.E.M. CPU @ 2.0GHz BIOS CPU family: 205 CPU family: 6 Model: 158 Thread(s) per core: 1 Core(s) per socket: 6 Socket(s): 1 Stepping: 10 CPU(s) scaling MHz: 23% CPU max MHz: 3500.0000 CPU min MHz: 800.0000Obviously that thing wont be running at base frequency while idling. Here is one if units right now:
analyzing CPU 0: driver: intel_pstate CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 4294.55 ms. hardware limits: 800 MHz - 3.50 GHz available cpufreq governors: performance, powersave current policy: frequency should be within 800 MHz and 3.50 GHz. The governor "powersave" may decide which speed to use within this range. current CPU frequency is 800 MHz.See, it scales down to 800Mhz with a watt meter I remember it translated to idling at around 10-11W.
I never said it was better than a Pi, I just said the difference is not worth it and you’re still ignoring the fact that i5-8500T will be able to do a LOT more work than the RPi5 could do while keeping the CPU bellow or at 2.1 GHz - not surpassing the 35 W TDP.
Okay got it, so you compared the highest possible TDP on a Pi with the average/idle TDP on a desktop, and you’re acting like that’s a fair comparison. Thanks for clearing that up!
No… I compared the highest possible TDP on a Pi with with the average TDP of a “T-CPU” (power-optimized) running at full load and I concluded by saying a realistic idle consumption is 11W.
Look I’m sure the Pi does a lot better than 11W idle, but at those such low consumptions is is mostly irrelevant. I also added that given load X (equivalent to the Pi CPU at max load) the Intel CPU will make make it without reaching even the 35W while the Pi is going to be running at a full 27W.
TDP != Power consumption.