When I planned these beds I spaced them far enough apart to get my lawn tractor in-between them, but getting between them and the fence involved my weed whacker. As anyone with a fence has found out, maintaining the grass at the base of a fence is a pain.

I’m 3/4 of the way done with the edging. It’s 10" tall with something like 6" or 7" of it buried. It does a good job of keeping grass out of our other beds, so I’m sure it will do a good job here. The downside is the most effective way of installing it is to trench first, put the edging in, and then refill the trench. If you try to use one of those big pizza peel looking things to make a narrow slide the will usually get wavy due to variation in trench depth.

I mowed to basically ground height between the beds, weed whacked around the beds, and put in a layer of that thick paper builders will use to protect flooring below the mulch. Some areas for cardboard instead, but we just didn’t have enough cardboard to cover it all. Hopefully it will be enough to kill the grass and hopefully that results in less grass appearing in my raised beds.

  • SchmidtGenetics@lemmy.worldEnglish
    21·
    5 months ago

    Trying to hold on until my surgery, steroid shots are so I don’t need to rely on pain killers, but they come with their own complications. Trying to find the right pacing in the mean time, but I hate not doing something if there’s stuff to do. It’s a struggle.

    I’ve seriously contemplated getting one, so many things I could make and use, but I also wouldn’t have the time, that would probably be a winter only type of thing. But once it’s setup and I’m comfortable, obviously wouldn’t be hard to quickly set something up or tinker with files in bed on a tablet as well. But than that would flare up the carpal tunnel anyways, so waiting until after the surgeries before even testing that water haha.

    • IMALlama@lemmy.worldOPEnglish
      2·
      5 months ago

      I hope you’re back to your normal physical self soon.

      As far as the 3D printer goes, there are three main types of categories of people with printers at home:

      • Tinkering with the printer is the hobby. This can be a mix of tuning for better quality, faster prints, etc as well as physical modifications to the printer. One of the extremes of this is the speedboat race where people go all out for the fastest print of a common model
      • Modeling things and then printing them. I fall largely into this camp. I’ve made many a replacement part for a kids toy, jigs/fixtures, brackets, printer mods, speakers, wagon wheels, a thing to keep cats out of potted plants, even a tiny toolbox for the minimal amount of tools I used to carry at work
      • The printer is largely an ends to printing free/paid designs from the Internet. There are tons of designs out there that are a mix of cute (but probably throw away), functional/practical, things you could sell, etc

      If you’re modeling it will be mouse and keyboard, but a SpaceMouse will improve ergonomics. All you’re really using the keyboard for is number input.

      If you find yourself in the functional print crew, don’t be surprised if you wind up printing things to help in your garden. Some of the PVC fittings holding together my arch are now printed parts (less effort to model and print a replacement than drive to the store) and the hooks the “gates” to my fence hang on are also printed. Once you get in the habit of finding things you can print you’ll be finding them everywhere.