Was planning to list it for sale somewhere, but no idea what to price it at. Any idea? Is it even worth someone’s time fixing it up?
Was planning to list it for sale somewhere, but no idea what to price it at. Any idea? Is it even worth someone’s time fixing it up?
I’m not an electrician, but I really doubt the kind of electricity coming through a cable is enough do anything more than a slight ouchy. There are amps powered by 9 volt batteries.
If there is high voltage present anywhere in your guitar, it’s a serious issue with your amp. There are high voltages present within a tube amp, but the amp isolates those from the input jack. The guitar itself only generates a tiny audio signal.
Please educate yourself before insisting what is or is not potentially unsafe…
Why is My Guitar or Microphone Shocking Me?
Please do not take unknown electrical issues for granted.
It’s oxidation on the pickups. This will not short anything. This person has no clue what they are talking about.
A guitar pickup, wires and magnets, don’t suddenly start shocking people and shorting amps with “rust” or oxidation.
Have you ever worked on antique electronics? I’m assuming not, but I have. The pickup coils are likely just as corroded and probably shorted from the back side with that much corrosion, which I assume from experience is from many years of age in a humid closet or basement.
I know what I’m talking about, that guitar shouldn’t be plugged up until an experienced tech opens it up and at least does a basic inspection and makes sure the pickup coils aren’t shorted out with a multimeter, at least to start with.
Hahahahaha this isn’t an antique guitar. Those aren’t even active pickups.
You are clueless about guitar electronics and how magnetic pickups work and are made.
I’m using the word antique a bit loosely here, as I don’t know what year it was made. But obvious context clues tell me that the guitar definitely has some years behind it. There’s the obvious corrosion, plus OP said they inherited it, meaning almost certainly the original owner has passed away.
I actually spent about 6 years as a guitar technician for a band that amongst other equipment rocked a Fender Stratocaster and dual 1000W Peavey stacks.
They’d never allow such a corroded guitar to hook up to their equipment willy-nilly without a full professional teardown, inspection, cleanup, any necessary parts and repairs, new strings, set the intonations, etc.
Maybe just maybe I’ve got a more professional attitude about it, from experience.
Hell, at bare minimum at least clean the old strings and spray some WD-40 into the tuner knobs and tune the thing up, can’t tell much of anything about how an old guitar is supposed to sound if you don’t at least try tuning it.
But I still wouldn’t go plugging it into an amplifier without checking the internals first, for all I know it could end up shorting out and blowing a perfectly good amplifier.
You can literally short the input to the amp and be fine. In fact, cheap cables do this all the time. There would have to be a major issue with the amps isolation between the preamp and power amp to have an issue. This is possible, but a rusty pickup is not really the issue. You’re simply ill-informed. It happens to the best of us.
Have you ever studied Samuel Goldwasser’s PhotoFacts?
I have. I’ve actually studied it so many times that I know the typical failure mode of electronic components in almost any situation.
Amplifiers are powered by transistors (or tubes back in the day, not much difference). When they happen to be stressed to the point of failure, they practically always fail as a short circuit.
Short circuits aren’t fun, that’s why they invented the Variac to properly test suspicious devices.
Edit: I hate to repeat myself, but would you plug in a rusted toaster? Do you not value your life, or would you rather test the components and clean things up first?
I’ve built multiple amplifiers from scratch, both tube and transistor based. But go off.
Good for you, awesome! Have you stress tested your circuits with corrosion to see what may or may not fail first?
http://repairfaq.org/
Nobody asked you what you could build from fresh scratch, I’m asking you what you’d do with electronics that have 15+ years of salt water vapor damage…?
Yes, I have experience with old electronics as well, and guitars, repair work, the whole lot. And I have an bs in EE.
But none of that matters because what is really happening here is that you are wrong, and instead of learning and moving on with a better understanding, you are tripling down and pulling the wool over your own eyes.
If you don’t understand the difference between a toaster and the front end of an amplifier, then you’ve outed yourself.
Also, no. Nobody tests their toaster when they plug it in.
No, everyone tests their toasters when they plug them in. Only the dead don’t report results, so the results are biased towards the living.
Please tell me WTF is your problem with maintaining a guitar?
Lol. If someone plugged in a shorted toaster, it would trip a breaker at worst. But survivorship bias is an awesome mental gymnastic. 8/10.
And nobody is arguing against maintaining a guitar. Just that you are being dumb. And maybe are a troll.